|
Excavator Log Grapple
Excavator Demolition Grapple
Excavator Sorting Grapple
Excavator Clamshell Bucket
Mini Excavator Grapples
Hanging rotators for excavators.
Rigid rotators for
excavators
Home
| |
The Valby excavator log grapples are mounted by using a hanging mount. The grapples are of bypass design which enable a
smooth roll in and release of the timber. The timber is supported from all sides when the
grapple is closed. The jaws close down to a small minimum opening. The jaws are made of
high grade Hardox steel. The joints have bronze bearings and grease fittings. The
connection rods are on both sides of the cylinder balancing the stress to the jaws.
The
Valby Grapples can be used to update log loaders to the modern bypass design. .
|
Valby GR-60 |
Valby GR-60HD |
Valby GR-75 |
Valby GR 100 |
| Max. gripping
width |
60 ½" |
60 ½" |
74 ¾" |
98 7/8" |
| Min. opening |
3 ½" |
3½" |
5 ½" |
5 7/8" |
| Max. lifting
capacity |
6600 lb. |
11000 lb. |
11000 lbs. |
15400 lb. |
| Height. open |
38 3/8" |
38 3/8" |
34 ¼" |
41 ¾" |
| Height.
closed |
21" |
23" |
25 ½" |
32" |
| Width of
wider claw |
15 " |
17 ½" |
18 3/4" |
19
11/16" |
| Working
pressure |
3625 psi |
3625 psi |
3625 psi |
3625 psi |
| Jaw material |
Hardox |
Hardox |
Hardox |
Hardox |
| Weight |
400 lb. |
550 lb. |
680 lb. |
1050 lb. |
| Recommended
Rotator: |
R12 |
R12 |
R12 |
R12 |
|
GR 100 log grapple open and closed
|
